Infrastructure
regeneration: The challenge of climate change
and sustainability - Design for strength or
durability?
(236 kb)
Shear
behaviour of steel fibre reinforced concrete
beams with low shear span to depth ratio
(181 kb)
Mix
proportioning of plain and rice husk ash concrete
as per draft IS 10262
(221 kb)
Proposed
codal provisions for design and detailing
of beam-column joints in seismic regions
(138 kb)
National
Building Code of India 2005: The building
code for the nation
(64 kb)
Reproportioning
concrete mixtures for rapid production of
precast units
(150 kb)
Evaluating
the effectiveness of fly ash incorporation
as PPC vis-à-vis separate addition
to the site-mixed OPC concrete
(128 kb)
Comparison
of effects of ultra fine fly ash and silica
fume in concrete
(144 kb)
Selection
of polymers for repair and rehabilitation
of RC structures
(94 kb)
Development
length of reinforcing bars - Need to revise
Indian codal provisions
(76 kb)
Availability
and management of fly ash in India
(127 kb)
Use
of fly ash in structural concrete - How much?
(62 kb)
Delhi
Metro: Quality control of concrete for underground
section
(62 kb)
Concrete
for hydro-electric projects: Combating alkali-aggregate
reaction
(108 kb)
Health
assessment of structures using NDT
(131 kb)
Partial
collapse of a multi-storeyed concrete structure R. N. Raikar
(50 kb)
Thermal
analysis of draft tube and spiral case mass
concrete
(44 kb)
Repair
and upgradation of RC silos using FRP
(81 kb)
Self-compacting
concrete
(96 kb)
Flood-drought
syndrome
Earthquake Tip 20 : Beam-column joints
(76 kb)
Design
of flexural members subjected to axial force
Design of a simply supported one-way slab
loaded by a strip load along the span
(90 kb)
Introducing earthquake engineering in civil
engineering curriculum Prof Sudhir K. Jain, et al reply to
Mr D.B. Dave
(41 kb)
Seismic
performance of conventional multi-storey building
with open ground floors for vehicular parking Ravi and Vasant Kanitkar reply to
N. Subramanian
(52 kb)
Letters
to the Editor
(33 kb)
Seismic
retrofitting of RC shaft support of elevated
tanks
(49 kb)
FBEC bars must not be used A.K. Kar
FBEC
bars must be used P.K. Singha Roy
(128 kb)
Particle
packing theories and their application in
concrete mixture proportioning: A review Dr. D J Dewar and N. Prabhakar
(43 kb)
Earthquake
engineering: Some recent trends Mr Praveen Kumar and Dr P.K. Biswas
(49 kb)
Damage
assessment and rehabilitation of concrete
structures: Three case studies Mr R.N. Raikar and Mr D. Srinivasan
(51 kb)
Design
and construction of heavily loaded, large-span
RC portal D. Srinivasan
(55 kb)
Anchorage
details and joint design in seismic RC frames Dr T.S. Thandavamoorthy
(55 kb)
Use
of silica fume in concrete P. K. Singha Roy
(61 kb)
Effect
of partial replacement of cement with fly
ash on the strength and durability of HPC P. K. Singha Roy
(63 kb)
High
ductility ribbed bars Bhupinder Singh
(57 kb)
Cement
content, exposure conditions and grades of
concrete U.H. Varyani
(66 kb)
Special
issue on IS 456 : 2000 P. K. Singha Roy
(81 kb)
Relative
stiffness of members of RC frames for the
analysis of forces U. H. Varyani
(35 kb)
Use
of pre engineered aluminium foam work for
mass housing U.H. Varyani
reply
by
D.V. Kulkarni
(55 kb)
Shortcomings
in Structural design provisions of IS 456
: 2000 N.
Prabhakar
reply
by the author Prof P. Dayaratnam
(67 kb)
Kudos to the editorial team!
(42 kb)
Design
criteria for crack control in RC liquid retaining
structures P.K. Singharoy
(41 kb)
Reply
to Civil engineering is noble too! Prof Dr Ing Jörg
Schlaich
Restoration
of hammer foundations in forging industry Dr. P. Srinivasulu and Ms T. Ch Madhavi
(236 kb)