Page 34 - openaccess

TECHNICAL PAPER

[68] Haneefa, K. M., Santhanam, M, and Parida, F. C. (2013). [81] Roy, D. M, Grutzeck, M. W., Scheetz, B. E., Idom, G.
“Performance characterization of geopolymer composites M., Thaulow, N., and Andersen, K.T. (1993). “Concrete
for hot sodium exposed sacrificial layer in fast breeder Microscopy”, Strategic Highway Research Program,
reactors”, Nuclear Engineering and Design, Vol. 265, National Research Council, Washington, DC.
No. 12, pp. 542-553.
[82] Jana, P. (2018). “Microscopy applied to geological and
[69] BS: 812-121 (1989). “Testing aggregates. Method for construction materials : A collection of papers”,
determination of soundness”, British Standard Institution, First edition.
U.K. [83] Winter, N. (2012). “Scanning electron microscopy of

[70] ASTM C33 (2018). “Standard specification for concrete cement and concrete”, WHD Microanalysis Consultants
aggregates”, ASTM Standard, USA. Ltd.
[71] Sippel, J., Siegesmund, S., Weiss, T., Nitsch, K. H., and [84] Ramachandran, V. S., and Beaudoin, J.J. (2000).
Korzen, M. (2007). “Decay of natural stones caused “Handbook of analytical techniques in concrete science
by fire damage”, Geological Society, London, Special and technology: Principles, techniques and applications”,
Publications, Vol. 271, No. 1, pp. 139-151. First edition Elsevier.

[72] Lane, D. S. (2006). “Significance of tests and properties [85] Scrivener, K., Snellings, R., Lothenbach, B. (2015). “A
of concrete and concrete making materials”, ASTM STP practical guide to microstructural analysis of cementitious
169C, ASTM International, West Conshohocken. materials”, CRC Press, First edition.
[73] Xing, Z., Beaucou, A., Hebert, L., Noumowe, R., and [86] Matos, L., Silva, A. S., Soares, D, Salta, M., Mirão, J. and
Ledesert, A. B., (2011). “Influence of the nature of Candeias, A. (2010). “The application of fluorescence
aggregates on the behavior of concrete subjected to microscopy and scanning electron microscopy in the
elevated temperature”, Cement and Concrete Research, detection of delayed ettringite formation in concrete”,
Vol. 41, No. 4, pp. 392-402. Materials Science Forum, Trans Tech Publications Limited,
Vol. 636, pp. 1266-1271.
[74] Broekmans, M. A. T. M. (2009). “Petrography as an
essential complementary method in forensic assessment [87] Cullity, B. D. and Stock, S. R. (2001). “Elements of X-ray
of concrete deterioration: Two case studies”, Materials diffraction”, Third edition, Pearson.
characterization, Vol. 60, No, 7, pp. 644-654. [88] Salvo, L., Cloetens, P., Maire, E., Zabler, S., Blandin, J.
[75] Elsen, J. (2006). “Microscopy of historic mortars: A review”, J., Buffiere, J. Y., Ludwig, W., Boller, E., Bellet, D., and
Cement and Concrete Research, Vol. 36, No. 8, Josserond, C. (2003). “X-ray micro-tomography an
pp. 1416–1424. attractive characterisation technique in materials science”
Nuclear Instruments and Methods in Physics Research B:
[76] Larbi, J. (2004). “Microscopy applied to the diagnosis of Beams Interactions in Materials and Atoms, Vol. 200, No. 1,
the deterioration of brick masonry”, Construction and pp. 273–286.
Building Materials, Vol. 18, No. 5, No. 299–307.
[89] ASTM C856 (2018). “Standard practice for petrographic
[77] Walker, H. N., Lane, D. S., and Stutzman, P. E. (2006). examination of hardened concrete”, ASTM Standard, USA.
“Petrographic methods of examining hardened concrete:
A petrographic manual (No. FHWA-HRT-04-150).” Federal [90] Rittmann, A., (2012). “Stable mineral assemblages of
Highway Administration, Office of Infrastructure Research igneous rocks: A method of calculation” Springer Science
and Development, United States. and Business Media, Vol. 6.
[91] Haneefa, K. M., Santhanam, M., and Parida, F. C. (2019).
[78] Raith, M. M., Raase, P., and Reinhardt, J. (2011). “Guide
to thin section petrography”, ISBN 978-300033606-5, “Performance indices of hot liquid sodium-exposed
University of Bonn Sacrificial surface layers in fast breeder reactors”,
Sekar et al. (eds.), In book: Advances in Manufacturing
[79] Ingham, J. (2010). “Geomaterials under the microscope: a Processes, September 2019, Lecture Notes in Mechanical
colour guide”, First edition, CRC Press. Engineering, Springer Nature Singapore.

[80] P. A. and Scholle, D. S. U. (2003). “Color guide to the
petrography of carbonate rocks: Grains, textures, porosity,
diagenesis”, The American Association of Petroleum
Geologists, Tulsa, Oklahoma, USA.

THE INDIAN CONCRETE JOURNAL | AUGUST 2022 35